AudioCodes Mediant 1000B User Manual page 331

User's Manual
3. Configure a SIP Interface according to the parameters described in the table below.
4. Click Add.
Parameter
Index
[SIPInterface_Index]
SRD
srd
[SIPInterface_SRDName
]
Name
interface-name
[SIPInterface_InterfaceN
ame]
Network Interface
network-interface
[SIPInterface_NetworkInt
Version 7.0
Table 17-5: SIP Interface Table Parameter Descriptions
Defines an index for the new table row.
Note: Each row must be configured with a unique index.
Assigns an SRD to the SIP Interface.
If only one SRD is configured in the SRD table, the SRD is assigned to
the SIP Interface by default. If multiple SRDs are configured in the SRD
table, no value is defined.
For configuring SRDs, see 'Configuring SRDs' on page 320.
Notes:

The parameter is mandatory.

You can assign the same SRD to multiple SIP Interfaces (SBC and
Gateway).

For the SAS application, use only SRD 0.
Defines an arbitrary name to easily identify the row.
The valid value is a string of up to 21 characters. By default, if you do not
configure a name, the device automatically assigns the name
"SIPInterface_<row index>" (e.g., "SIPInterface_1" when added to Index
1).
Assigns a Control-type IP network interface to the SIP Interface.
By default, no value is defined (None).
Description
331 Mediant 1000B Gateway and E- SBC
17. Control Network