AudioCodes Mediant 1000B User Manual page 747

User's Manual
9. To load additional files, use the Next
through the wizard to the desired file-load wizard page. Alternatively, you can navigate
to the relevant file-load wizard page by clicking the respective file-name buttons listed
in the left pane of the wizard pages.
10. The wizard page for loading an ini file provides you with the following options:
•
Load a new ini file: In the 'Load an ini file...' field, click Browse, and then
navigate to where the ini file is located on your computer. Select the file, and then
click Load File; the device loads the ini file.
•
Retain the existing configuration (default): Select the 'Use existing
configuration' check box to use the current configuration (and do not select an ini
file).
•
Restore configuration to factory defaults: Clear the 'Use existing configuration'
check box (and do not select an ini file).
Note:
assigned default values (according to the .cmp file running on the device) and
thereby, overwrite values previously configured for these parameters.
Version 7.0
Figure 43-9: Software Upgrade Wizard - Load INI File
If you use the wizard to load an ini file, parameters excluded from the ini file are
and Back
747 Mediant 1000B Gateway and E- SBC
43. Software Upgrade
buttons to navigate