Customizing Cdrs For Sbc Calls - AudioCodes Mediant 1000B User Manual

User's Manual
Parameter

51.2.3 Customizing CDRs for SBC Calls

The SBC CDR Format table lets you customize SBC-related CDRs that are generated by
the device for the following:

CDRs (media and SIP signaling) sent in Syslog messages. For CDRs sent in Syslog
messages, you can customize the name of the CDR field. The table lets you configure
up to 128 Syslog CDR customization rules.

CDRs related to RADIUS accounting and sent in RADIUS accounting request
messages. For RADIUS accounting CDRs, you can customize the RADIUS Attribute's
prefix name and RADIUS Attribute's ID, for standard RADIUS Attributes and vendor-
specific RADIUS Attributes (VSA). For example, instead of the default VSA name,
"h323-connect-time" with RADIUS Attribute ID 28, you can change the name to "Call-
Connect-Time" with ID 29. The table lets you configure up to 40 RADIUS-accounting
CDR customization rules. For more information on RADIUS accounting, see
Configuring RADIUS Accounting on page 827.

CDRs stored locally on the device. For local storage of CDRs, you can customize the
name of the CDR field. The table lets you configure up to 64 locally-stored CDR
customization rules. For more information on storing CDRs on the device, see Storing
CDRs on the Device on page 825.
If you do not configure a CDR customization rule for a specific CDR, the device generates
the CDR in a predefined default CDR format (see CDR Field Description on page 805).
Notes:
•
The following standard RADIUS Attributes cannot be customized: 1 through 6, 18
through 20, 22, 23, 27 through 29, 32, 34 through 39, 41, 44, 52, 53, 55, 60
through 85, 88, 90, and 91.
•
If the RTCP XR feature is unavailable (not licensed or disabled), the R-factor VoIP
metrics are not provided in CDRs (CDR fields, Local R Factor and Remote R
Factor) generated by the device. Instead, these CDR fields are sent with the value
127, meaning that information is unavailable.
The following procedure describes how to customize SBC-related CDRs through the Web
interface. You can also configure it through ini file (SBCCDRFormat) or CLI (configure voip
> services cdr > cdr-format sbc-cdr-format).

To customize SBC-related CDRs:
1. Open the SBC CDR Format table (Configuration tab > System menu > Call Detail
Record > SBC CDR Format).
Version 7.0

Local Input Packets: 47

Local Output Packets: 48
If you configure the value to 0 and the RADIUS Attribute is not any of
the ones listed above, the configuration is invalid.
821
51. Reporting Information to External Party
Description
Mediant 1000B Gateway and E- SBC