AudioCodes Mediant 1000B User Manual page 629

User's Manual
Parameter
admission-name
[SBCAdmissionControl_
AdmissionControlName]
Limit Type
limit-type
[SBCAdmissionControl_
LimitType]
SRD
srd-name
[SBCAdmissionControl_
SRDName]
IP Group
ip-group-name
[SBCAdmissionControl_I
PGroupName]
SIP Interface
sip-interface-name
[SBCAdmissionControl_
SIPInterfaceName]
Request Type
request-type
[SBCAdmissionControl_
RequestType]
Request Direction
request-direction
[SBCAdmissionControl_
RequestDirection]
Reserved Capacity
reservation
[SBCAdmissionControl_
Reservation]
Version 7.0
defined.
Defines the entity to which the rule applies.

[0] IP Group (default)

[1] SRD

[2] SIP Interface
Assigns an SRD to the rule.
For all SRDs, configure the parameter to Any. By default, no value is
defined (None).
Note: The parameter is applicable only if 'Limit Type' is configured to
SRD.
Assigns an IP Group to the rule.
For all IP Groups, configure the parameter to Any. By default, no value is
defined (None).
Note: The parameter is applicable only if 'Limit Type' is configured to IP
Group.
Assigns a SIP Interface to the rule.
For all SIP Interfaces, configure the parameter to Any. By default, no
value is defined (None).
Note: The parameter is applicable only if 'Limit Type' is configured to SIP
Interface.
Defines the SIP dialog-initiating request type to which you want to apply
the rule (not the subsequent requests that can be of different type and
direction).

[0] All = (Default) Includes the total number of all dialogs.

[1] INVITE

[2] SUBSCRIBE

[3] Other
Defines the direction of the SIP request to which the rule applies.

[0] Both = (Default) Rule applies to inbound and outbound SIP
dialogs.

[1] Inbound = Rule applies only to inbound SIP dialogs.

[2] Outbound = Rule applies only to outbound SIP dialogs.
Defines the guaranteed (minimum) call capacity.
Notes:

Reserved call capacity is applicable only to IP Groups and SRDs (i.e.,
the 'Limit Type' parameter must be configured to IP Group or SRD). If
you configure the 'Limit Type' parameter to SIP Interface, leave the
'Reserved Capacity' parameter at its' default (i.e., 0).

Reserved call capacity is applicable only to INVITE and SUBSCRIBE
messages.

Reserved call capacity must be less than the maximum capacity
(limit) configured for the CAC rule.

The total reserved call capacity configured for all the CAC rules must
be within the device's total call capacity support.
629
32. Configuring Admission Control
Description
Mediant 1000B Gateway and E- SBC