AudioCodes Mediant 1000B User Manual page 628

routing rule is located, the device rejects the SIP request with a SIP 480 "Temporarily
Unavailable" response.
Note:
Classification process. If the call/request is rejected at this stage, no routing is
performed. The enforcement for the outgoing leg is performed within each alternative
route
classification/routing, and another during alternative routing process.
The following procedure describes how to configure CAC rules through the Web interface.
You can also configure it through ini file (SBCAdmissionControl) or CLI (configure voip >
sbc sbc-admission-control).

To configure a CAC rule:
1. Open the Admission Control table (Configuration tab > VoIP menu > SBC >
Admission Control).
2. Click Add; the following dialog box appears:
Figure 32-1: Admission Control Table - Add Row Dialog Box
3. Configure an Admission Control rule according to the parameters described in the
table below.
4. Click Add.
Table 32-1: Admission Control Table Parameter Description
Parameter
Index
[SBCAdmissionControl_I
ndex]
Name
User's Manual
The device applies the CAC rule for the incoming leg immediately after the
iteration. This is accessed
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Defines an arbitrary name to easily identify the row.
The valid value is a string of up to 20 characters. By default, no value is
Mediant 1000B Gateway and E- SBC
from two places:
Description
628
one during initial
Document #: LTRT-27044