Gateway Application Parameters; Fax And Modem Parameters - AudioCodes Mediant 1000B User Manual

User's Manual

59.10 Gateway Application Parameters

59.10.1 Fax and Modem Parameters

The fax and modem parameters are described in the table below.
Parameter
Fax Transport Mode
fax-transport-mode
[FaxTransportMode]
V.21 Modem Transport Type
V21-modem-transport-
type
[V21ModemTransportType]
V.22 Modem Transport Type
V22-modem-transport-
type
[V22ModemTransportType]
V.23 Modem Transport Type
V23-modem-transport-
type
[V23ModemTransportType]
V.32 Modem Transport Type
V32-modem-transport-
type
[V32ModemTransportType]
V.34 Modem Transport Type
V34-modem-transport-
Version 7.0
Table 59-38: Fax and Modem Parameters
Determines the fax transport mode used by the device.

[0] Disable = transparent mode

[1] T.38 Relay (default)

[2] Bypass

[3] Events Only
Note: The parameter is overridden by the parameter IsFaxUsed. If
the parameter IsFaxUsed is set to 1 (T.38 Relay) or 3 (Fax
Fallback), then FaxTransportMode is always set to 1 (T.38 relay).
Determines the V.21 modem transport type.

[0] Disable = (Default) Transparent.

[2] Enable Bypass

[3] Events Only = Transparent with Events.
Note: You can also configure this functionality per specific calls,
using IP Profiles (IpProfile_VxxTransportType). For more
information, see 'Configuring IP Profiles' on page 385.
Determines the V.22 modem transport type.

[0] Disable = Transparent.

[2] Enable Bypass (default)

[3] Events Only = Transparent with Events.
Note: You can also configure this functionality per specific calls,
using IP Profiles (IpProfile_VxxTransportType). For more
information, see 'Configuring IP Profiles' on page 385.
Determines the V.23 modem transport type.

[0] Disable = Transparent.

[2] Enable Bypass (default)

[3] Events Only = Transparent with Events.
Note: You can also configure this functionality per specific calls,
using IP Profiles (IpProfile_VxxTransportType). For more
information, see 'Configuring IP Profiles' on page 385.
Determines the V.32 modem transport type.

[0] Disable = Transparent.

[2] Enable Bypass (default)

[3] Events Only = Transparent with Events.
Notes:

The parameter applies only to V.32 and V.32bis modems.

You can also configure this functionality per specific calls, using
IP Profiles (IpProfile_VxxTransportType). For more information,
see 'Configuring IP Profiles' on page 385.
Determines the V.90/V.34 modem transport type.

[0] Disable = Transparent.
983
59. Configuration Parameters Reference
Description
Mediant 1000B Gateway and E- SBC