AudioCodes Mediant 1000B User Manual page 312

7. Configure a Media Enhancement Rule according to the parameters described in the
table below.
8. Click Add, and then reset the device with a save ("burn") to flash memory.
Table 16-5: Media Enhancement Rules Table Parameter Descriptions
Parameter
Index
rule-index
[MediaEnhancementRules_RuleI
ndex]
Trigger
trigger
[MediaEnhancementRules_Trigg
er]
Color
color
[MediaEnhancementRules_Color
]
Rule Action
action-rule
[MediaEnhancementRules_Actio
nRule]
Alternative IP Profile ID
value
[MediaEnhancementRules_Actio
nValue]
User's Manual
Defines the index of the table row entry.
Defines the monitored metrics parameter or bandwidth
associated with this rule.

[0] MOS (default)

[1] Delay

[2] Packet Loss

[3] Jitter

[4] Bandwidth
Defines the color-coded threshold change of the monitored
metrics or bandwidth (configured in the 'Trigger' parameter) for
which this rule is done.

[0] Red (default) = Yellow-to-Red threshold is crossed.

[1] Yellow = Green-to-Yellow threshold is crossed.
Defines the action that the device performs when the color-
coded threshold is crossed:

[0] Accept Calls (default)

[1] Reject Calls

[2] Alternative IP Profile = An alternative IP Profile is used, as
configured in the 'Value' field (below).
Notes:

If the parameter is set to a restrictive action (i.e., Reject Calls
or Alternative IP Profile) for Yellow and no action is set for
Red, the device also applies the Yellow action to Red, if this
color-coded threshold occurs.

If the parameter is set to a permissive action (i.e., Accept
Calls) for Red and no action is set for Yellow, the device
applies the same action to Yellow, if this color-coded
threshold occurs.
Defines an alternative IP Profile ID for the IP Group that is
associated with this rule, if this rule is applied. The parameter is
applicable only if the 'Rule Action' parameter is set to
Alternative IP Profile.
312
Mediant 1000B Gateway and E- SBC
Description
Document #: LTRT-27044