AudioCodes Mediant 1000B User Manual page 710

2. Insert the replaced module, by performing the following:
a. Physically insert the replaced module (refer to the Installation Manual) into the
same slot in which the previous module resided.
b. In the Home page, click the title of the module ("<module type> Reserved") that
you want to replace; the Insert Module button appears:
c. Click the Insert Module button; a message appears informing you that this may
take a few seconds. When the message disappears, the module is inserted,
which is indicated by the disappearance of the word 'Reserved' from the module's
name.
User's Manual
Mediant 1000B Gateway and E- SBC
710 Document #: LTRT-27044