Software Upgrade Wizard - AudioCodes Mediant 1000B User Manual

SBC license. This mechanism prevents misuse of SBC licenses allocated by the License
Pool Manager Server.
The following SNMP alarms relate to the allocation/de-allocation of SBC licenses by the
License Pool Manager Server:

acLicensePoolInfraAlarm (1.3.6.1.4.1.5003.9.10.1.21.2.0.106):
•
Sent when the device receives a new SBC license from the License Pool
Manager Server and a device reset is required.
•
Sent when the device is unable to access the License Pool Manager Server.
•
Sent when the SBC license allocated by the License Pool Manager Server is
about to expire (e.g., when communication with the License Pool Manager Server
is lost)

acLicensePoolApplicationAlarm (1.3.6.1.4.1.5003.9.10.1.21.2.0.107):
•
Sent when the device receives an SBC license from the License Pool Manager
Server that exceeds the maximum SBC session capacity that can be supported
by the device.
•
Sent when the device resets with an SBC license allocated by the License Pool
Manager Server that exceeds the maximum SBC session capacity that can be
supported by the device. The device sets the capacity to its maximum (and
values beyond the device's capability are not applied)
Notes:
•
No configuration is required on the device; the License Pool Manager Server
controls the allocation/de-allocation of its resource pool to the managed devices.
For more information on the License Pool Manager Server, refer to the EMS
User's Manual.
•
The allocation/de-allocation of SBC licenses to the device by the License Pool
Manager Server is service affecting and requires a device reset.
•
If the device is restored to factory defaults, the SBC license allocated by the
License Pool Manager Server is deleted.
•
If the device is allocated an SBC license by the License Pool Manager Server that
exceeds the maximum number of sessions that it can support, the device sets the
number of sessions to its maximum supported
43.4

Software Upgrade Wizard

The Web interface's Software Upgrade Wizard lets you easily upgrade the device's
software version (.cmp file). The wizard also provides you the option to load other files
such as an ini file and Auxiliary files (e.g., Call Progress Tone / CPT file). However, loading
a .cmp file is mandatory through the wizard and before you can load any other type of file,
the .cmp file must be loaded.
Notes:
•
You can obtain the latest software files from AudioCodes Web site at
http://www.audiocodes.com/downloads.
•
When you start the wizard, the rest of the Web interface is unavailable. After the
files are successfully installed with a device reset, access to the full Web interface
is restored.
•
If you upgraded your firmware (.cmp file) and the "SW version mismatch"
User's Manual
Mediant 1000B Gateway and E- SBC
744 Document #: LTRT-27044