AudioCodes Mediant 1000B User Manual page 470

Parameter
remove-from-right
[_RemoveFromRight]
Number of Digits to Leave
num-of-digits-to-
leave
[_LeaveFromRight]
Prefix to Add
prefix-to-add
[_Prefix2Add]
Suffix to Add
suffix-to-add
[_Suffix2Add]
TON
ton
[_NumberType]
NPI
npi
[_NumberPlan]
Presentation
is-presentation-
restricted
[_IsPresentationRestricted]
User's Manual
number prefix. For example, if you enter 3 and the redirect number is
5551234, the new number is 5551.
Defines the number of digits that you want to retain from the right of
the redirect number.
Defines the number or string that you want added to the front of the
redirect number. For example, if you enter 9 and the redirect number
is 1234, the new number is 91234.
Defines the number or string that you want added to the end of the
redirect number. For example, if you enter 00 and the redirect number
is 1234, the new number is 123400.
Defines the Type of Number (TON).
The default is Not Configured [-1].

If NPI is set to Unknown, you can set TON to Unknown [0].

If NPI is set to Private, you can set TON to Unknown [0],
International [1], National [2], Network Specific [3] or Subscriber
[4].

If NPI is set to E.164 Public, you can set TON to Unknown [0],
International [1], National [2], Network Specific [3], Subscriber [4]
or Abbreviated [6].
For more information on available NPI/TON values, see Numbering
Plans and Type of Number on page 481.
Defines the Numbering Plan Indicator (NPI).

[-1] Not Configured = (Default) Value received from PSTN/IP is
used

[0] Unknown

[1] E.164 Public

[9] Private
For more information on available NPI/TON values, see Numbering
Plans and Type of Number on page 481.
Enables caller ID.

Not Configured = Privacy is determined according to the Caller ID
table (see Configuring Caller Display Information on page 561).

[0] Allowed = Sends Caller ID information when a call is made
using these destination / source prefixes.

[1] Restricted = Restricts Caller ID information for these prefixes.
Note: If the parameter is set to Restricted and the 'AssertedIdMode'
parameter is set to Add P-Asserted-Identity, the From header in the
INVITE message includes the following:
From: 'anonymous' <sip:
anonymous@anonymous.invalid> and 'privacy: id'
header.
470
Mediant 1000B Gateway and E- SBC
Description
Document #: LTRT-27044