Least Cost Routing Parameters - AudioCodes Mediant 1000B User Manual
Media gateway & enterprise session border controller (e-sbc)
Hide thumbs
Also See for Mediant 1000B:
- User manual (1281 pages) ,
- Hardware installation manual (92 pages) ,
- Configuration note (52 pages)
Table of Contents
Advertisement
User's Manual
Parameter
search-dns
[LdapServersSearchDNs]
Management LDAP Groups Table
Management LDAP Groups
Table
configure voip >
ldap > mgmt-ldap-
groups
[MgmntLDAPGroups]
LDAP Server Groups Table
LDAP Server Groups Table
config-voip > ldap >
ldap-servers-group
[LDAPServersGroup]
59.14.2 Least Cost Routing Parameters
The Least Cost Routing (LCR) parameters are described in the table below.
Parameter
Cost Group Table
configure voip >
services least-cost-
routing cost-group
[CostGroupTable]
Version 7.0
FORMAT LdapServersSearchDNs_Index =
LdapServersSearchDNs_Base_Path,
LdapServersSearchDNs_LdapConfigurationIndex,
LdapServersSearchDNs_SearchDnInternalIndex;
[ \LdapServersSearchDNs ]
For a detailed description of the table, see 'Configuring LDAP DNs
(Base Paths) per LDAP Server' on page 239.
Defines the users group attribute in the AD and corresponding
management access level.
The format of the ini file table parameter is as follows:
[ MgmntLDAPGroups ]
FORMAT MgmntLDAPGroups_Index =
MgmntLDAPGroups_LdapConfigurationIndex,
MgmntLDAPGroups_GroupIndex, MgmntLDAPGroups_Level,
MgmntLDAPGroups_Group;
[ \MgmntLDAPGroups ]
For a description of the table, see 'Configuring Access Level per
Management Groups Attributes' on page 241.
Defines LDAP Server Groups.
The format of the ini file table parameter is as follows:
[ LdapServersGroup ]
FORMAT LdapServersGroup_Index = LdapServersGroup_Name,
LdapServersGroup_ServerType,
LdapServersGroup_SearchMethod,
LdapServersGroup_CacheEntryTimeout,
LdapServersGroup_CacheEntryRemovalTimeout,
LdapServersGroup_SearchDnsMethod;
[ \LdapServersGroup ]
For a description of the table, see 'Configuring LDAP Server
Groups' on page 232.
Table 59-78: LCR Parameters
Defines the Cost Groups for LCR, where each Cost Group is
configured with a name, fixed call connection charge, and a call rate
(charge per minute).
[ CostGroupTable ]
FORMAT CostGroupTable_Index =
CostGroupTable_CostGroupName,
CostGroupTable_DefaultConnectionCost,
CostGroupTable_DefaultMinuteCost;
[ \CostGroupTable ]
1135
59. Configuration Parameters Reference
Description
Description
Mediant 1000B Gateway and E- SBC
Advertisement
Table of Contents
