Configuring Http Proxy Services - AudioCodes Mediant 1000B User Manual

15.6.3 Configuring HTTP Proxy Services

The HTTP Proxy Services table lets you configure up to 10 HTTP Proxy Services.
The following procedure describes how to configure HTTP Proxy Services through the Web
interface. You can also configure it through ini file (HTTPProxyService) or CLI (configure
system > http-proxy > http-proxy-serv).

To configure an HTTP Proxy Service:
1. Open the HTTP Proxy Services table (Configuration tab > VoIP menu > Services >
HTTP Proxy > HTTP Proxy Services).
2. Click Add; the following dialog box appears:
Figure 15-38: HTTP Proxy Services Table - Add Row Dialog Box
3. Configure an HTTP Proxy service according to the parameters described in the table
below.
4. Click Add, and then save ("burn") your settings to flash memory.
Table 15-21: HTTP Proxy Services Table Parameter Descriptions
Parameter
Index
[HTTPProxyService_Index]
Name
service-name
[HTTPProxyService_Servic
eName]
Listening Interface
listening-int
[HTTPProxyService_Listen
ingInterface]
User's Manual
Defines an index number for the new table row.
Notes:

Each row must be configured with a unique index.

The parameter is mandatory.
Defines an arbitrary name to easily identify the row.
The valid value is a string of up to 40 characters. By default, no value
is defined.
Notes:

Each row must be configured with a unique name.

The parameter is mandatory.
Assigns an HTTP Interface to the HTTP Proxy service. To configure
HTTP Interfaces, see 'Configuring HTTP Interfaces' on page 274.
Note: The parameter is mandatory.
276
Mediant 1000B Gateway and E- SBC
Description
Document #: LTRT-27044