AudioCodes Mediant 1000B User Manual page 480

Mapping ISDN to SIP table that matches the new ISDN cause code. For example, if
you configure a mapping rule in the Release Cause ISDN to ISDN table to change a
received 127 code to 16, the device searches for a rule in the Release Cause
Mapping ISDN to SIP table for an ISDN code of 16 (ignoring any entry with code
127).
The following procedure describes how to configure ISDN-to-ISDN release cause mapping
through the Web interface. You can also configure it through ini file (CauseMapIsdn2Isdn)
or CLI (configure voip > gw manipulations cause-map-isdn2isdn).

To configure a ISDN-to-ISDN release cause mapping rule:
1. Open the Release Cause Mapping from ISDN to ISDN table (Configuration tab >
VoIP menu > Gateway > Manipulations > Release Cause ISDN > ISDN).
2. Click Add; the following dialog box appears:
Figure 23-8: Release Cause ISDN to ISDN Table - Add Row Dialog Box
3. Configure a mapping rule according to the parameters described in the table below.
4. Click Add.
Table 23-11: Release Cause Mapping ISDN to ISDN Table Parameter Descriptions
Parameter
Index
[CauseMapIsdn2Isdn_Inde
x]
Orig. Q.850 Causes
q850-causes
[CauseMapIsdn2Isdn_Orig
IsdnReleaseCause]
Map Q.850 Causes
q850-causes
[CauseMapIsdn2Isdn_Map
IsdnReleaseCause]
User's Manual
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Defines the originally received ISDN Q.850 cause code. For example,
you can enter "127" (without apostrophes) to represent cause code
127 Interworking, Unspecified.
The valid value (cause code) is 1 to 127.
Defines the ISDN Q.850 cause code to which you want to change the
originally received cause code. For example, you can enter "16"
(without apostrophes) to represent cause code 16 Normal Call
Clearing.
The valid value (cause code) is 1 to 127.
480
Mediant 1000B Gateway and E- SBC
Description
Document #: LTRT-27044