AudioCodes Mediant 1000B User Manual page 545

User's Manual
The following procedure describes how to configure the Supplementary Services table
through the Web interface. You can also configure it through ini file (ISDNSuppServ) or CLI
(configure voip > gw digitalgw isdn-supp-serv).

To configure endpoint supplementary services:
1. Open the Supplementary Services table (Configuration tab > VoIP menu > Gateway
> DTMF and Supplementary > Supp Services Table).
2. Click Add; the following dialog box appears:
Figure 26-5: Supplementary Services Table - Add Row Dialog Box
3. Configure a supplementary service according to the parameters described in the table
below.
4. Click Add.
The figure below displays an example of multiple-line extensions configured in the
Supplementary Services table:
You can register and un-register an endpoint configured in the table. The registration
method is according to the 'Registration Mode' parameter located in the Trunk Group
Settings page (see 'Configuring Trunk Group Settings' on page 451).

To register or un-register an endpoint:
1. Select the required table row in which the endpoint is configured.
Version 7.0
Figure 26-6: Supplementary Services Table Page
26. Configuring Supplementary Services
545 Mediant 1000B Gateway and E- SBC