Ocsp Parameters - AudioCodes Mediant 1000B User Manual

59.4.7 OCSP Parameters

The Online Certificate Status Protocol (OCSP) parameters are described in the table
below.
Parameter
Enable OCSP Server
enable
[OCSPEnable]
Primary Server IP
server-ip
[OCSPServerIP]
Secondary Server IP
secondary-server-ip
[OCSPSecondaryServerIP]
Server Port
server-port
[OCSPServerPort]
Default Response When
Server Unreachable
default-response
[OCSPDefaultResponse]
User's Manual
Table 59-28: OCSP Parameters
Enables or disables certificate checking using OCSP.

[0] Disable (default)

[1] Enable
For a description of OCSP, see Configuring Certificate Revocation
Checking (OCSP).
Defines the IP address of the OCSP server.
The default IP address is 0.0.0.0.
Defines the IP address (in dotted-decimal notation) of the
secondary OCSP server (optional).
The default IP address is 0.0.0.0.
Defines the OCSP server's TCP port number.
The default port number is 2560.
Determines whether the device allows or rejects peer certificates
when the OCSP server cannot be contacted.

[0] Reject (default)

[1] Allow
924
Mediant 1000B Gateway and E- SBC
Description
Document #: LTRT-27044