AudioCodes Mediant 1000B User Manual page 565

User's Manual

To configure caller ID permissions per port:
1. Open the Caller ID Permissions table (Configuration tab > VoIP menu > Gateway >
Analog Gateway > Caller ID Permissions).
2. Click Add; the following dialog box appears:
Figure 27-6: Caller ID Permissions Table - Edit Row Dialog Box
3. Configure a caller ID permission per port according to the parameters described in the
table below.
4. Click Add.
Table 27-5: Caller ID Permissions Table Parameter Descriptions
Parameter
Index
[EnableCallerId_Index]
Module
[EnableCallerId_Module]
Port
[EnableCallerId_Port]
Port Type
[EnableCallerId_PortType
]
Caller ID
caller-id
[EnableCallerId_IsEnable
d]
Version 7.0
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
(Read-only) Displays the module number on which the port is located.
(Read-only) Displays the port number.
(Read-only) Displays the port type (e.g., FXS).
Enables Caller ID generation (FXS) or detection (FXO) per port.

[0] Disable

[1] Enable
565
Description
Mediant 1000B Gateway and E- SBC
27. Analog Gateway