Loading Auxiliary Files Through Cli; Loading Auxiliary Files Through Ini File Using Tftp - AudioCodes Mediant 1000B User Manual

User's Manual
2. Click the Browse button corresponding to the Auxiliary file type that you want to load,
navigate to the folder in which the file is located, and then click Open; the name of the
file appears in the field next to the Browse button.
3. Click the Load File button corresponding to the file you want to load.
4. Repeat steps 2 through 3 for each file you want to load.
5. Reset the device with a burn-to-flash for your settings to take effect (if you have
loaded a Call Progress Tones file).
Note:
installed on the device are maintained if the ini file does not contain these Auxiliary
files.

43.1.1.2 Loading Auxiliary Files through CLI

You can load Auxiliary files from user-defined URLs, using the following CLI commands:

Single Auxiliary file:
# copy <file> from <URL>
For example:
# copy call_progress_tones from
http://192.169.11.11:80/cpt_us.dat

Multiple (batch) Auxiliary files: The Auxiliary files must be contained in a TAR (Tape
ARchive) file (.tar). The TAR file can contain any number and type of Auxiliary files
(e.g., Dial Plan file and CPT file).
# copy aux-package from | to <URL with TAR file name>
For example:
# copy aux-package from http://192.169.11.11:80/aux_files.tar
For more information on CLI commands, refer to the CLI Reference Guide.

43.1.1.3 Loading Auxiliary Files through ini File using TFTP

You can load Auxiliary files to the device through the ini file, using a TFTP server. For more
information on Auxiliary ini file parameters, see 'Auxiliary and Configuration File Name
Parameters' on page 890.

To load Auxiliary files through ini file:
1. Create an ini file that includes the names of the Auxiliary files that you want loaded, for
example:
CallProgressTonesFilename = 'usa_tones_13.dat'
DialPlanFileName = 'dial-plan-us.dat'
2. Save the ini file and the Auxiliary files in the same folder on your TFTP server.
3. Reset the device (you can power off and then power on the device); the device loads
the ini file and then the Auxiliary files as defined in the ini file, through TFTP.
Version 7.0
When loading an ini file using the Web interface, Auxiliary files that are already
717 Mediant 1000B Gateway and E- SBC
43. Software Upgrade