Viewing Average Call Duration - AudioCodes Mediant 1000B User Manual

Monitoring menu > Quality Of Experience).
2. From the 'SRD/IpGroup' drop-down list, select whether you want to view QoE for an
SRD or IP Group.
3. From the 'Index' drop-down list, select the SRD or IP Group index.
4. From the 'Dir' drop-down list, select the call direction:
•
In - incoming calls
•
Out - outgoing calls
•
Both - incoming and outgoing calls
5. From the 'Type' drop-down list, select the SIP message type:
•
Invite - INVITE
•
Subscribe - SUBSCRIBE
•
Other - all SIP messages
To refresh the charts, click Refresh. To reset the counters, click Reset Counters.
49.4

Viewing Average Call Duration

The Average Call Duration page displays information about a specific SRD or IP Group.
This page includes two graphs:

Upper graph: displays the number of calls (INVITEs).

Lower graph: displays the average call duration.
Note:
User's Manual
Figure 49-3: Quality Of Experience Graph
The Quality Of Experience page is applicable only to SBC calls.
Mediant 1000B Gateway and E- SBC
784 Document #: LTRT-27044