AudioCodes Mediant 1000B User Manual page 236

Table 15-8: LDAP Configuration Table Parameter Descriptions
Parameter
Index
[LdapConfiguration_Inde
x]
LDAP Servers Group
server-group
[LdapConfiguration_Gro
up]
LDAP Server IP
server-ip
[LdapConfiguration_Lda
pConfServerIp]
LDAP Server Port
server-port
[LdapConfiguration_Lda
pConfServerPort]
LDAP Server Max
Respond Time
max-respond-time
[LdapConfiguration_Lda
pConfServerMaxRespon
dTime]
LDAP Server Domain
Name
domain-name
[LdapConfiguration_Lda
pConfServerDomainNa
me]
User's Manual
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Assigns the LDAP server to an LDAP Server Group, configured in the
LDAP Server Groups table (see 'Configuring LDAP Server Groups' on
page 232).
Notes:

The parameter is mandatory and must be set before configuring the
other parameters in the table.

Up to two LDAP servers can be assigned to the same LDAP Server
Group.
Defines the IP address of the LDAP server (in dotted-decimal notation,
e.g., 192.10.1.255).
By default, no IP address is defined.
Notes:

The parameter is mandatory.

If you want to use an FQDN for the LDAP server, leave the parameter
undefined and configure the FQDN in the 'LDAP Server Domain
Name' parameter (see below).
Defines the port number of the LDAP server.
The valid value range is 0 to 65535. The default port number is 389.
Defines the duration (in msec) that the device waits for LDAP server
responses.
The valid value range is 0 to 86400. The default is 3000.
Note: If the response time expires, you can configure the device to use
its local database (Web Users table) for authenticating the user. For
more information, see 'Configuring Local Database for Management User
Authentication' on page 246.
Defines the domain name (FQDN) of the LDAP server. The device tries
to connect to the LDAP server according to the IP address listed in the
received DNS query. If there is no connection to the LDAP server or the
connection to the LDAP server fails, the device tries to connect to the
LDAP server with the next IP address in the DNS query list.
Note: If the 'LDAP Server IP' parameter is configured, the 'LDAP Server
Domain Name' parameter is ignored. Thus, if you want to use an FQDN,
leave the 'LDAP Server IP' parameter undefined.
236
Mediant 1000B Gateway and E- SBC
Description
Document #: LTRT-27044