Ldap Parameters - AudioCodes Mediant 1000B User Manual

User's Manual
59.14.1.3

LDAP Parameters

The Lightweight Directory Access Protocol (LDAP) parameters are described in the table
below.
Parameter
LDAP Service
configure
voip/ldap/enable
[LDAPServiceEnable]
LDAP Authentication Filter
configure voip >
ldap > auth-filter
[LDAPAuthFilter]
Use LDAP for Web/Telnet
Login
configure voip >
ldap > enable-mgmt-
login
[MgmtLDAPLogin]
[LDAPDebugMode]
LDAP Numeric Attribute
configure voip >
sip-definition
advanced-settings >
ldap-numeric-attr
[LDAPNumericAttributes]
MS LDAP OCS Number
attribute name
ldap-ocs-nm-attr
[MSLDAPOCSNumAttribute
Name]
MS LDAP PBX Number
attribute name
ldap-pbx-nm-attr
[MSLDAPPBXNumAttribute
Name]
MS LDAP MOBILE Number
attribute name
ldap-mobile-nm-attr
[MSLDAPMobileNumAttribu
teName]
Version 7.0
Table 59-77: LDAP Parameters
Enables the LDAP feature.

[0] Disable (default)

[1] Enable
Note: For the parameter to take effect, a device reset is required.
Defines the LDAP search filter attribute for searching the login
username in the directory's subtree for LDAP-based user
authentication and authorization.
You can use the dollar ($) sign to represent the username. For
example, if the parameter is set to "(sAMAccountName=$)" and the
user logs in with the username "SueM", the LDAP query is run for
sAMAccountName=SueM.
Enables LDAP-based management-user login authentication and
authorization.

[0] Disable (default)

[1] Enable
Note: For the parameter to take effect, a device reset is required.
Determines whether to enable the LDAP task debug messages.
This is used for providing debug information regarding LDAP tasks.
The valid value range is 0 to 3. The default is 0.
Defines up to five LDAP Attributes (separated by commas) for
which the device employs LDAP query searches in the AD for
numbers that may have characters between the digits.
For more information, see Enabling LDAP Searches for Numbers
with Characters on page 252.
Defines the name of the attribute that represents the user's Lync
number in the Microsoft AD database.
The valid value is a string of up to 49 characters. The default is
"msRTCSIP-Line".
Defines the name of the attribute that represents the user PBX
number in the Microsoft AD database.
The valid value is a string of up to 49 characters. The default is
"telephoneNumber".
Defines the name of the attribute that represents the user Mobile
number in the Microsoft AD database.
The valid value is a string of up to 49 characters. The default is
"mobile".
1133
59. Configuration Parameters Reference
Description
Mediant 1000B Gateway and E- SBC