Configuring Additional Dhcp Options - AudioCodes Mediant 1000B User Manual

User's Manual
Table 15-3: DHCP Vendor Class Table Parameter Descriptions
Parameter
Index
dhcp vendor-class
<index>
[DhcpVendorClass_Index]
DHCP Server Index
dhcp-server-number
[DhcpVendorClass_DhcpS
erverIndex]
Vendor Class Identifier
vendor-class
[DhcpVendorClass_Vendor
ClassId]

15.1.3 Configuring Additional DHCP Options

The DHCP Option table lets you configure up to 10 additional DHCP Options that the
DHCP server can use to service the DHCP client. These DHCP Options are included in the
DHCPOffer response sent by the DHCP server.
The following procedure describes how to configure DHCP Options through the Web
interface. You can also configure it through ini file (DhcpOption) or CLI (configure voip >
dhcp option).
Note:
the default ones, which are configured in the DHCP Servers table. In other words, if
you configure Option 67 in the DHCP Option table, the device uses the value
configured in the DHCP Option table instead of the value configured in the DHCP
Servers table.

To configure DHCP Options:
1. Open the DHCP Servers table (Configuration tab > VoIP menu > Services > DHCP
Severs).
2. In the table, select the row of the desired DHCP server for which you want to configure
additional DHCP Options, and then click the DHCP Option Table link, located below
the table; the DHCP Option table opens.
Version 7.0
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Associates the VCI table entry with a DHCP server that you configured
in 'Configuring the DHCP Server' on page 211.
Note: Currently, only one DHCP server (Index 0) can be configured
and therefore, the parameter is always set at 0.
Defines the value of the VCI DHCP Option 60.
The valid value is a string of up to 80 characters. By default, no value
is defined.
The additional DHCP Options configured in the DHCP Option table override
Description
217 Mediant 1000B Gateway and E- SBC
15. Services