AudioCodes Mediant 1000B User Manual page 1099

User's Manual
Parameter
Add Trunk Group ID as
Prefix
trkgrpid-prefix
[AddTrunkGroupAsPrefix]
Add Trunk ID as Prefix
trk-id-as-prefix
[AddPortAsPrefix]
Add Trunk Group ID as
Prefix to Source
trkgrpid-pref2source
[AddTrunkGroupAsPrefixTo
Source]
Replace Empty Destination
with B-channel Phone
Number
empty-dst-w-bch-nb
[ReplaceEmptyDstWithPort
Number]
[CopyDestOnEmptySource]
Add NPI and TON to Calling
Number
npi-n-ton-to-cng-nb
[AddNPIandTON2CallingNu
mber]
Add NPI and TON to Called
Number
npi-n-ton-to-cld-nb
[AddNPIandTON2CalledNu
Version 7.0
SIP Diversion header.
Determines whether the Trunk Group ID is added as a prefix to the
destination phone number (i.e., called number) for Tel-to-IP calls.

[0] No = (Default) Don't add Trunk Group ID as prefix.

[1] Yes = Add Trunk Group ID as prefix to called number.
Notes:

This option can be used to define various routing rules.

To use this feature, you must configure the Trunk Group IDs (see
Configuring Trunk Groups on page 449).
Determines whether or not the slot number/port number/Trunk ID is
added as a prefix to the called (destination) number for Tel-to-IP calls.

[0] No (Default)

[1] Yes
If enabled, the device adds the following prefix to the called phone
number: slot number (a single digit in the range of 1 to 6) and port
number/Trunk ID (single digit in the range 1 to 8). For example, for the
first trunk/channel located in the first slot, the number "11" is added as
the prefix.
This option can be used to define various routing rules.
Determines whether the device adds the Trunk Group ID (from where
the call originated) as the prefix to the calling number (i.e. source
number).

[0] No (default)

[1] Yes
Determines whether the internal channel number is used as the
destination number if the called number is missing.

[0] No (default)

[1] Yes
Note: The parameter is applicable only to Tel-to-IP calls and if the
called number is missing.
Determines whether the destination number is copied to the source
number if no source number is present, for Tel-to-IP calls.

[0] = (Default) Source Number is left empty.

[1] = If the Source Number of a Tel-to-IP call is empty, the
Destination Number is copied to the Source Number.
Determines whether the Numbering Plan Indicator (NPI) and Type of
Numbering (TON) are added to the Calling Number for Tel-to-IP calls.

[0] No = (Default) Do not change the Calling Number.

[1] Yes = Add NPI and TON to the Calling Number ISDN Tel-to-IP
call.
For example: After receiving a Calling Number of 555, NPI of 1, and
TON of 3, the modified number becomes 13555. This number can later
be used for manipulation and routing.
Determines whether NPI and TON are added to the Called Number for
Tel-to-IP calls.

[0] No = (Default) Do not change the Called Number.

[1] Yes = Add NPI and TON to the Called Number of ISDN Tel-to-IP
call.
1099
59. Configuration Parameters Reference
Description
Mediant 1000B Gateway and E- SBC