AudioCodes Mediant 1000B User Manual page 224

2. Click Add; the following dialog box appears:
Figure 15-7: RADIUS Servers Table - Add Row Dialog Box
3. Configure a RADIUS server according to the parameters described in the table below.
4. Click Add.
Table 15-6: RADIUS Servers Table Parameter Descriptions
Parameter
Index
[RadiusServers_Index]
IP Address
ip-address
[RadiusServers_IPAddre
ss]
Authentication Port
auth-port
[RadiusServers_Authenti
cationPort]
Accounting Port
acc-port
[RadiusServers_Account
ingPort]
Shared Secret
shared-secret
[RadiusServers_Shared
Secret]
User's Manual
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Defines the IP address of the RADIUS server (in dotted-decimal
notation).
Defines the port of the RADIUS Authentication server for authenticating
the device with the RADIUS server. When set to any value other than 0,
the RADIUS server is used by the device for RADIUS-based
management-user login authentication. When set to 0, RADIUS-based
login authentication is not implemented.
The valid value is 0 to any integer. The default is 1645.
Defines the port of the RADIUS Accounting server to where the device
sends accounting data of SIP calls as call detail records (CDR). When
set to any value other than 0, the RADIUS server is used by the device
for RADIUS-based accounting (CDR). When set to 0, RADIUS-based
accounting is not implemented.
The valid value is 0 to any integer. The default is 1646.
Defines the shared secret (password) for authenticating the device with
the RADIUS server. This should be a cryptically strong password. The
shared secret is also used by the RADIUS server to verify the
authentication of the RADIUS messages sent by the device (i.e.,
message integrity).
The valid value is up to 48 characters. By default, no value is defined.
224
Mediant 1000B Gateway and E- SBC
Description
Document #: LTRT-27044