AudioCodes Mediant 1000B User Manual page 210
Media gateway & enterprise session border controller (e-sbc)
Hide thumbs
Also See for Mediant 1000B:
- User manual (1281 pages) ,
- Hardware installation manual (92 pages) ,
- Configuration note (52 pages)
Table of Contents
Advertisement
The procedure below describes how to configure SRTP through the Web interface.
To enable and configure SRTP:
1.
Open the Media Security page (Configuration tab > VoIP menu > Media > Media
Security).
2.
From the 'Media Security' drop-down list (EnableMediaSecurity), select Enable to
enable SRTP.
3.
Configure the other SRTP parameters as required.
4.
Click Submit, and then reset the device with a burn-to-flash for your settings to take
effect.
User's Manual
Figure 14-15: Media Security Page
210
Mediant 1000B Gateway and E- SBC
Document #: LTRT-27044
Advertisement
Table of Contents
