Quality Of Service Parameters - AudioCodes Mediant 1000B User Manual

59.2.5 Quality of Service Parameters

The Quality of Service (QoS) parameters are described in the table below.
Parameter
Layer-2 Class Of Service (CoS) Parameters (VLAN Tag Priority Field)
DiffServ Table
configure voip >
vlan-mapping
[DiffServToVlanPriority]
Layer-3 Class of Service (TOS/DiffServ) Parameters
Media Premium QoS
media-qos
[PremiumServiceClassMe
diaDiffServ]
Control Premium QoS
control-qos
[PremiumServiceClassCo
ntrolDiffServ]
Gold QoS
gold-qos
[GoldServiceClassDiffSer
v]
Bronze QoS
bronze-qos
[BronzeServiceClassDiffS
erv]
User's Manual
Table 59-13: QoS Parameters
The table configures DiffServ-to-VLAN Priority mapping. For each
packet sent to the LAN, the VLAN Priority of the packet is set according
to the DiffServ value in the IP header of the packet.
The format of this ini file is as follows:
[ DiffServToVlanPriority ]
FORMAT DiffServToVlanPriority_Index =
DiffServToVlanPriority_DiffServ, DiffServToVlanPriority_VlanPriority;
[ \DiffServToVlanPriority ]
For example:
DiffServToVlanPriority 0 = 46, 6;
DiffServToVlanPriority 1 = 40, 6;
DiffServToVlanPriority 2 = 26, 4;
DiffServToVlanPriority 3 = 10, 2;
For a description of the table, see Configuring Quality of Service on
page 146.
Note: For the parameter to take effect, a device reset is required.
Global parameter that defines the DiffServ value for Premium Media
CoS content. You can also configure this functionality per specific calls,
using IP Profiles (IpProfile_IPDiffServ). For a detailed description of the
parameter and for configuring this functionality in the IP Profile table,
see 'Configuring IP Profiles' on page 385.
Note: If this functionality is configured for a specific IP Profile, the
settings of this global parameter is ignored for calls associated with the
IP Profile.
Global parameter that defines the DiffServ value for Premium Control
CoS content (Call Control applications). You can also configure this
functionality per specific calls, using IP Profiles
(IpProfile_SigIPDiffServ). For a detailed description of the parameter
and for configuring this functionality in the IP Profile table, see
'Configuring IP Profiles' on page 385.
Note: If this functionality is configured for a specific IP Profile, the
settings of this global parameter is ignored for calls associated with the
IP Profile.
Defines the DiffServ value for the Gold CoS content (Streaming
applications).
The valid range is 0 to 63. The default is 26.
Defines the DiffServ value for the Bronze CoS content (OAMP
applications).
The valid range is 0 to 63. The default is 10.
898
Mediant 1000B Gateway and E- SBC
Description
Document #: LTRT-27044