Cdr Fields For Gateway Application - AudioCodes Mediant 1000B User Manual

CDR Field Name
LocalRFactor
RemoteRFactor
LocalMosCQ
RemoteMosCQ
TxRTPIPDiffServ
LatchedRtpIp
LatchedRtpPort
LatchedT38Ip
LatchedT38Port

51.2.1.3 CDR Fields for Gateway Application

The default CDR fields for the Gateway calls are listed in the table below.
Field Name
GWReportType
Cid
SessionId
Trunk
BChan
ConId
TG
User's Manual
Local conversation quality
Note: If the RTCP XR feature is unavailable (not licensed or
disabled), this R-factor VoIP metric is not provided. Instead, the
device sends the CDR field with the value 127, meaning that
information is unavailable.
Remote conversation quality
Note: If the RTCP XR feature is unavailable (not licensed or
disabled), this R-factor VoIP metric is not provided. Instead, the
device sends the CDR field with the value 127, meaning that
information is unavailable.
Local MOS for conversation
Remote MOS for conversation
Media IP DiffServ
Remote IP address of the incoming RTP stream that the device
"latched" on to as a result of the RTP latching mechanism for NAT
traversal.
Remote RTP port of the incoming RTP stream that the device
"latched" on to as a result of the RTP latching mechanism for NAT
traversal.
Latching of a new T.38 stream - new IP address
Latching of a new T.38 stream - new port
Table 51-4: Default CDR Fields for Gateway Calls
Report type:

CALL_START

CALL_CONNECT

CALL_END
Port number
SIP session identifier
Physical trunk number
Selected B-channel
SIP conference ID
Trunk Group ID
Mediant 1000B Gateway and E- SBC
Description
Description
810 Document #: LTRT-27044