AudioCodes Mediant 1000B User Manual page 643

User's Manual
2. Click Add; the following dialog box appears:
Figure 34-3: Message Condition Table - Add Row Dialog Box
3. Configure a Message Condition rule according to the parameters described in the
table below.
4. Click Add.
An example of configured Message Condition rules is shown in the figure below:
Figure 34-4: Example of Configured SIP Message Conditions

Index 0: Incoming SIP dialog that is classified as belonging to a User-type IP Group.

Index 1: Incoming SIP dialog that contains a SIP Via header.

Index 2: Incoming SIP dialog with 101 as the user part in the SIP From header.
Table 34-2: Message Condition Table Parameter Descriptions
Parameter
Index
[ConditionTable_Index]
Name
name
[ConditionTable_Name]
Condition
condition
[ConditionTable_Conditio
n]
Version 7.0
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Defines a brief description of the Condition rule.
The valid value is a string of up to 59 characters.
Defines the Condition rule of the SIP message.
The valid value is a string.
Note: User and host parts must be enclosed in single quotes.
643
Description
Mediant 1000B Gateway and E- SBC
34. Routing SBC