AudioCodes Mediant 1000B User Manual page 1134

Parameter
ldap-private-nm-attr
[MSLDAPPrivateNumAttribu
teName]
MS LDAP DISPLAY Name
Attribute Name
ldap-display-nm-attr
[MSLDAPDisplayNameAttri
buteName]
ldap-primary-key
[MSLDAPPrimaryKey]
ldap-secondary-key
[MSLDAPSecondaryKey]
LDAP Cache Service
cache
[LDAPCacheEnable]
LDAP Configuration Table
LDAP Configuration Table
configure voip >
ldap > ldap-
configuration
[LdapConfiguration]
LDAP Server Search Base DN Table
LDAP Server Search Base
DN Table
configure voip >
ldap > ldap-servers-
User's Manual
Defines the name of the attribute that represents the user's private
number in the AD. If this value equals the value of the
MSLDAPPrimaryKey or MSLDAPSecondaryKey parameter, then
the device queries the AD for the destination number in this private
attribute name; otherwise, the parameter is not used as a search
key.
The default is "msRTCSIP-PrivateLine".
Defines the attribute name that represents the Calling Name in the
AD for LDAP queries based on calling number.
The valid value is a string of up to 49 characters. The default is
"displayName".
Defines the name of the attribute used as a query search key for the
destination number in the AD. This is used instead of the "PBX"
attribute name (configured by the MSLDAPPBXNumAttributeName
parameter).
The default is not configured.
Defines the name of the attribute used as the second query search
key for the destination number in the AD, if the primary search key
or PBX search is not found.
Enables the LDAP cache service.

[0] Disable (default)

[1] Enable
Notes:

For the parameter to take effect, a device reset is required.

For more information on LDAP caching, see 'Configuring the
Device's LDAP Cache' on page 243.
Defines LDAP servers.
The format of the ini file table parameter is as follows:
[ LdapConfiguration ]
FORMAT LdapConfiguration_Index = LdapConfiguration_Group,
LdapConfiguration_LdapConfServerIp,
LdapConfiguration_LdapConfServerPort,
LdapConfiguration_LdapConfServerMaxRespondTime,
LdapConfiguration_LdapConfServerDomainName,
LdapConfiguration_LdapConfPassword,
LdapConfiguration_LdapConfBindDn, LdapConfiguration_Interface,
LdapConfiguration_MngmAuthAtt, LdapConfiguration_useTLS,
LdapConfiguration_ConnectionStatus;
[ \LdapConfiguration ]
For a description of the table, see 'Configuring LDAP Servers' on
page 234.
Defines the full base path (i.e., distinguished name / DN) to the
objects in the AD where the query is done, per LDAP server.
The format of the ini file table parameter is as follows:
[ LdapServersSearchDNs ]
1134
Mediant 1000B Gateway and E- SBC
Description
Document #: LTRT-27044