AudioCodes Mediant 1000B User Manual page 836

include Syslog messages in the DR sent to a Debug Recording server.
•
To configure the Syslog server's address, see ''Configuring Address of Syslog
Server'' on page 848. To configure additional, global Syslog settings, see
Configuring Syslog on page 840.
•
To configure the Debug Recording server's address, see ''Configuring Address of
Debug Recording Server'' on page 851.
•
To configure additional, global CDR settings such as at what stage of the call the
CDR is generated (e.g., start and end of call), see Configuring CDR Reporting on
page page 824.
The following procedure describes how to configure Logging Filter rules through the Web
interface. You can also configure it through ini file (LoggingFilters) or CLI (configure system
> logging > logging-filters).

To configure a logging filtering rule:
1. Open the Logging Filters table (Configuration tab > System menu > Logging >
Logging Filters Table).
2. Click Add; the following dialog box appears:
Figure 52-1: Logging Filters Table - Add Row Dialog Box
3. Configure a logging filter according to the parameters described in the table below.
4. Click Add.
Parameter
Index
[LoggingFilters_Inde
x]
Filter Type
filter-type
[LoggingFilters_Filter
Type]
User's Manual
Logging Filters Table Parameter Descriptions
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Defines the filter type criteria.

[1] Any (default)

[2] Trunk ID = Filters log according to Trunk ID. Note: Applicable only to
the Gateway application.

[3] Trunk Group ID = Filters log according to Trunk Group ID. For
configuring Trunk Groups, see Configuring Trunk Groups on page 449.
Note: Applicable only to the Gateway application.

[4] Trunk & B-channel = Filters log according to Trunk and B-channel.
Note: Applicable only to the Gateway application.
Mediant 1000B Gateway and E- SBC
Description
836 Document #: LTRT-27044