AudioCodes Mediant 1000B User Manual page 245

User's Manual
"telephoneNumber=1004", the device sends an LDAP query to the server requesting
values for the "displayName", "mobile" and "ipPhone" Attributes of this search key. When
the device receives the LDAP response, it replaces the old values in the cache with the
new values received in the LDAP response.

To refresh the LDAP cache per LDAP Server Group:
1. Open the LDAP Settings page (Configuration tab > VoIP menu > Services > LDAP
> LDAP Settings).
2. Under the Cache Actions group, do the following:
a. From the 'LDAP Group Index' drop-down list, select the required LDAP Server
Group (see 'Configuring LDAP Server Groups' on page 232).
b. In the 'LDAP Refresh Cache by Key' field, enter the LDAP search key that you
want to refresh (e.g., telephoneNumber=1004).
c. Click Refresh; if a request with the specified key exists in the cache, a request is
sent to the LDAP server for the Attributes associated in the cache with the search
key.
Version 7.0
Figure 15-19: LDAP Cache Refresh Flowchart
Figure 15-20: Refreshing LDAP Cache
245 Mediant 1000B Gateway and E- SBC
15. Services