Installing The Diaphragm Valves In The Main Oven - Thermo Scientific TRACE 1300 Instruction Manual

3
Components Installation
Installing Valves and Fittings into the Main Oven

Installing the Diaphragm Valves in The Main Oven

46 TRACE 1310 Auxiliary Oven Instruction Manual
 To install a diaphragm valve in the main oven
Installing valves consists of the following steps:
• Installing the solenoid valve
• Installing the diaphragm valve
• Connecting the gas line
CAUTION Turn the actuator gas off before you start these procedures.
Note The installation of the diaphragm valve requires the use of the fixing clamp ring.
Diaphragm Valve
1. Installing the solenoid valve.
a. Install the solenoid manifold on the rear wall of the valve compartment.
See the example of
Figure 61. Diaphragm Valve Installation (1)
Clamp Ring
Fixing Dowel
Figure 61.
Solenoid Manifold
Thermo Scientific