3
Components Installation
Installing Valves and Fittings in the Unheated Compartment
60
TRACE 1310 Auxiliary Oven Instruction Manual
b. Place the clamp ring over the hole on the bracket, then secure the clamp ring using
the two screws and nuts provided. Take loose one of the two nuts allowing the dowel
to tighten the clamp ring. See
Figure 85. Unheated Diaphragm Valve Installation (1)
c. Loosen the dowel on the clamp ring, then insert the valve into the clamp ring.
d. Secure the valve tightening the dowel. See
Figure
85.
Nuts
Mounting
Clamp Ring
Fixing Screws
Figure
86.
Thermo Scientific