1
Site Preparation
Introduction
Introduction
Entrance Requirements
2
TRACE 1310 Auxiliary Oven Instruction Manual
The TRACE 1310 Auxiliary Oven is a factory configured temperature controlled enclosure
attached to the right side of the TRACE 1300/1310 GC. See
Figure 1.
TRACE 1300/1310 GC and TRACE 1310 Auxiliary Oven
On-site installation is related to the gas plumbing defined by the application or accompanying
diagram.
Use the following guidelines to make sure the entrance to your site will allow delivery of the
TRACE 1300/1310 GC and TRACE 1310 Auxiliary Oven.
1. Ensure the width of your delivery door opening is at least 81 cm (32 in.).
2. Make sure you have enough room to move boxes around corners, into elevators, or
through doorways. The table below contains the dimensions and weight of shipping
boxes, so that you can make accommodations.
Figure
1.
Thermo Scientific