Installing The Auxiliary Detectors Assembly - Thermo Scientific TRACE 1300 Instruction Manual

3
Components Installation

Installing the Auxiliary Detectors Assembly

Installing the Auxiliary Detectors Assembly
80 TRACE 1310 Auxiliary Oven Instruction Manual
Note Installation of the flow restrictor:
The previous figures shown an example of installation of the flow restrictor into the main
oven. The flow restrictor can be secured to the holes available.
Connect the flow restrictor to the pneumatic circuit according to the scheme on
This section provides instructions for installing the auxiliary detectors assemble into the
detector housing. See Figure
Figure 115. Auxiliary Detectors Assembly
Note Figure 115 to Figure 119
into the assembly. If only a auxiliary detector is required, the assembly will be shipped
with a detector seat empty.
115.
show both the left and right auxiliary detectors installed
page 76.
Thermo Scientific