Thermo Scientific
Figure 50. Sample Inlet Fitting for High Temperature
At the end of the installation of the sample inlet fittings for high temperature, place the
protection sleeve on the connector that protrudes the front of the TRACE 1310 Auxiliary
Oven. See
Figure
51.
Figure 51. Protection sleeve
WARNING-BURN HAZARD During the runs the protective sleeve may be hot. Do not
touch it to avoid burns. Allow it to cool to room temperature before touching it.
3
Installing Valves and Fittings into the Main Oven
Plate
Extension
Fixing Screws
Sample Inlet Fitting
TRACE 1310 Auxiliary Oven Instruction Manual
Components Installation
Protection Sleeve
39