Thermo Scientific TRACE 1300 Instruction Manual page 87

Thermo Scientific
Figure 86. Unheated Diaphragm Valve Installation (2)
2. Install the assembly into the unheated compartment under the main oven.
a. Install the bracket into the unheated compartment, paying attentions to meet the
fixing slots on the bracket to the three studs located as shown in
Figure 87. Unheated Diaphragm Valve Installation (2)
#
b. Push the bracket against the studs, then secure the assembly by tightening the studs.
3. Install the solenoid valve.
3
Installing Valves and Fittings in the Unheated Compartment
Valve
Dowel
TRACE 1310 Auxiliary Oven Instruction Manual
Components Installation
Figure 87.
Studs
Slots
61