Thermo Scientific TRACE 1300 Instruction Manual page 78

3
Components Installation
Installing Valves and Fittings in the Unheated Compartment
52 TRACE 1310 Auxiliary Oven Instruction Manual
Figure 71. Needle Valve and Sample Inlet Fitting Installation (1)
c. Using a pencil or other tool, push into the corresponding holes the for removing the
relevant caps. See the example in
Figure 72. Needle Valve and Sample Inlet Fitting Installation (2)
2. Mounting the needle valve on the plate.
Figure 72.
Caps
Plate with Six Seats
Thermo Scientific