Thermo Scientific TRACE 1300 Instruction Manual page 103

Thermo Scientific
Figure 111. Channel Modification
6. You can position the splitter and flow restrictor at your convenience inside the TRACE
1310 Auxiliary Oven according to the pneumatic circuit in
Figure 112, Figure 113, and
three views. The components of the kit are highlighted in yellow.
Figure 112. Example of Kit Installation - First View
Figure 114 shown an example of installation of the kit in
TRACE 1310 Auxiliary Oven Instruction Manual
3
Components Installation
Installing the Auxiliary Gas Modules
M5 Cap
O-Ring
Gas Inlet Fitting
M5 Gas Inlet Fittings
1/8-in. Cap
Figure 110.
Splitter
(See the note on page 79
Flow Restrictor
(See the note on page
Charcoal Trap
Vent
1/8-in. Cap
Auxiliary Gas Module
)
79)
77