Thermo Scientific TRACE 1300 Instruction Manual page 63

Thermo Scientific
Figure 44. Needle Valve and Sample Inlet Fitting Installation (6)
b. Mount the extension on the seat 5 of the plate by matching its fixing holes to the
fixing holes on the plate.
c. Insert the three fixing screws into the corresponding fixing holes, then tighten the
screws using the proper Torxhead key or screwdriver. See
Figure 45. Needle Valve and Sample Inlet Fitting Installation (7)
d. Carefully insert and screw the sample inlet fitting into the extension. See
and Figure 47.
Figure 46. Needle Valve and Sample Inlet Fitting Installation (8)
3
Components Installation
Installing Valves and Fittings into the Main Oven
Extension
Fixing Screws
Sample Inlet Fitting
Figure 43.
TRACE 1310 Auxiliary Oven Instruction Manual
Figure 47
37