Thermo Scientific TRACE 1300 Instruction Manual page 114

3
Components Installation
Installing the Methanizer Assembly
88 TRACE 1310 Auxiliary Oven Instruction Manual
Figure 128. Methanizer (1)
2. Look for the four slots and for the hole on the back wall of the main oven, and for the
four hooks on the back of the methanizer assembly. See
Figure 129. Methanizer Installation (2)
Passing Hole
3. Insert the methanizer assembly into the back of the instrument, paying attention to guide
the OUT tubing into the passing hole provided on the back wall of the main oven
4. Push the assembly until the four hooks enter into the relevant slot, then hook the
assembly pushing it downwards. See
Protective Grid
Figure
Hooks
Figure 130.
Protective Grid
Fixing Screws
129.
Slots
OUT Tubing
Thermo Scientific