Thermo Scientific TRACE 1300 Instruction Manual page 129

Thermo Scientific
10. Reinstall the Electronic Module.
a. Guide the electronic module into its housing.
b. Push down the module. Be sure to plug the terminal contacts of the mother board
into the two slots of the backplane board. See
Figure 153. Electronic Module Re-installation (1)
Figure 154. Electronic Module Re-installation (2)
11. Replace the back and top covers of the GC.
a. Reconnect the ground wire to the back cover terminal.
b. Replace the back and top cover proceeding in the reverse order in which it was
removed.
Wiring the TRACE 1310 Auxiliary Oven to the GC
Figure 153 and
Mother Board Connectors
Backplane Board Connectors
TRACE 1310 Auxiliary Oven Instruction Manual
3
Components Installation
Figure 154.
103