Thermo Scientific TRACE 1300 Instruction Manual page 94

3
Components Installation
Installing Valves and Fittings in the Unheated Compartment
68 TRACE 1310 Auxiliary Oven Instruction Manual
Figure 98. Unheated Valve for Liquid Samples Valve Installation (7)
5. Connecting gas lines from the solenoid valve manifold to the actuator of the rotary valve.
With reference to Figure 99
Figure 99. Unheated Valve for Liquid Samples Valve Installation (8)
Actuator Upper Fitting
Actuator Lower Fitting
a. Locate the 4 mm nylon tubing supplied in the TRACE 1310 Auxiliary Oven kit and
cut it into two equal 12-in. pieces.
Events Connector J24
proceed as follows:
Thermo Scientific