Thermo Scientific TRACE 1300 Instruction Manual page 100

3
Components Installation
Installing the Auxiliary Gas Modules
74 TRACE 1310 Auxiliary Oven Instruction Manual
2. Place the second auxiliary gas module over the primary module. Guide and push the
second module towards the back until the three gas inlet fittings protrude from the back
panel through the three upper holes. See
Figure 106. Second Auxiliary Gas Module Installation (2)
3. Fix the module to the back panel by using the two fixing screws provided. See
Figure 107. Second Auxiliary Gas Module Installation (3)
4. Fix the second module to the floor of the unheated compartment. See
Figure 106.
Figure 107.
Figure 108.
Thermo Scientific