Getting Started; Installing The Auxiliary Gas Interface On The Left Wall Of The Oven - Thermo Scientific TRACE 1310 Hardware Manual

Getting Started

Installing the Auxiliary Gas Interface on the Left Wall of the Oven

Thermo Scientific
To install and connect the Auxiliary Gas Interface and the Auxiliary Gas Module, see the
following sections:
• "Installing the Auxiliary Gas Interface on the Left Wall of the Oven"
• "Installing the Auxiliary Gas Interface on the Right Wall of the Oven"
• "Installing the Auxiliary Gas Interface on the Oven for HRMS"
• "Installing and Connecting the Auxiliary Gas Module"

To install the auxiliary gas interface on the left wall of the oven
1. Make sure that the preliminary operations have been carried out. See
Operations" on page
2. Remove the left side panel.
a. Open the front door of the GC.
b. Using a T20 Torxhead screwdriver, unscrew the left side panel screw from the interior
front panel. See
Figure 568. Left Side Panel Fixing Screw
524.
Figure 568. Save the screw because it will be reused later.
TRACE 1300 and TRACE 1310 Hardware Manual
10
Adding Systems
Adding an Auxiliary Gas System
on page 525
on page 528
on page 532
on page 534
"Preliminary
525