Verify The Subscriber Profile Configuration - Cisco ASR 5000 Series Administration Manual

VLANs
Important
config
context context_name

Verify the Subscriber Profile Configuration

Use the following command to view the configuration for a subscriber profile:
[local]
Notes:
• Repeat this command for each subscriber.
• Save your configuration as described in the Verifying and Saving Your Configuration chapter.
VLAN-Related CLI Commands
VLAN-related features and functions are supported across several CLI command modes. The following tables
identify commands associated with configuration and monitoring of VLAN-related functions.
For detailed information regarding the use of the commands listed below, see the Command Line Interface
Reference.
Table 40: VLAN-Related Configuration Commands
CLI Mode
AAA Server Group Configuration Mode
ACS Charging Action Configuration Mode
These instructions assume that you have already configured subscriber-type VLAN tags according to the
instructions provided in Creating VLAN Tags, on page
subscriber name user_name
ip vlan vlan_id
end
host_name show subscriber configuration username user_name
#
Command
radius attribute nas-ip-address address
ip_address nexthop-forwarding-address
ip_address vlan vlan_id
ip vlan vlan_id
Verify the Subscriber Profile Configuration
301.
Description
Sets the RADIUS client to provide the
VLAN ID with the nexthop forwarding
address to a system when running in single
nexthop gateway mode.
Note: To access the vlan keyword,
aaa-large configuration must be enabled
via the Global Configuration mode.
Configures the VLAN identifier to be
associated with the subscriber traffic in the
destination context.
ASR 5500 System Administration Guide, StarOS Release 21.4
303