Description (Ipsec Profile) - Cisco CRS User Manual

description (IPSec profile)

description (IPSec profile)
To create a description of an IPSec profile, use the description command in profile configuration mode. To
delete a profile description, use the no form of this command.
description string
no description
Syntax Description
string
Command Default
None
Command Modes
Crypto IPSec profile
Command History
Release
Release 2.0
Usage Guidelines
Use the description command inside the profile configuration submode to create a description for an IPSec
profile.
Task ID
Task ID
profile configuration
Examples The following example shows the creation of a profile description:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# crypto ipsec profile newprofile
RP/0/RP0/CPU0:router(config-newprofile)# description this is a sample profile
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
132
Character string describing the IPSec profile.
Modification
This command was introduced.
Operations
read, write
IPSec Commands
OL-24740-01