Interactively Call The Window From The Part Program (Mmc) - Siemens SINUMERIK 840D sl Programming Manual

Additional functions

14.7 Interactively call the window from the part program (MMC)

14.7 Interactively call the window from the part program (MMC)
14.7
Function
You can use the MMC command to display user-defined dialog windows (dialog displays) on
the HMI from the part program.
The dialog window appearance is defined in a pure text configuration (COM file in cycles
directory), while the HMI system software remains unchanged.
User-defined dialog windows cannot be called simultaneously in different channels.
Syntax
MMC(CYCLES,PICTURE_ON,T_SK.COM,BILD,MGUD.DEF,BILD_3.AWB,TEST_1,A1","S")
Significance
MMC
CYCLES
PICTURE_ON
or
PICTURE_OFF
T_SK.COM
DISPLAY
MGUD.DEF
PICTURE_3.AWB
TEST_1
A1
"S"
References
Refer to the Commissioning Manual for detailed information on programming the MMC
command (incl. programming examples).
790
Calling the dialog window interactively from the part program on the
HMI.
Operating area in which the configured user dialog boxes are
implemented.
Command: Display selection or display deselection.
Com file: Name of the dialog display file (user cycles). The dialog
display design is defined here. The dialog screen is used to display
user variables and/or comment texts.
Name of dialog display: The individual displays are selected via the
names of the dialog displays.
User data definition file, which is addressed while reading/writing
variables.
Graphics file
Display time or acknowledgement variable.
Text variables...",
Acknowledgement mode: synchronous, acknowledgement via "OK"
soft key.
Programming Manual, 06/2009, 6FC5398-2BP20-0BA0
Job Planning