Utilities: Firmware; Utilities: Firmware  Base-Modem; Utilities: Firmware  Base-Modem  Boot-Rom, Image#X; Utilities: Firmware  Base-Modem Select - Comtech EF Data CDM-625A Installation And Operation Manual

CDM-625A Advanced Satellite Modem
Front Panel Operation
6.2.6.7

Utilities: Firmware

THESE MENUS ARE FOR DIAGNOSTIC PURPOSES. ONLY CHANGE AN IMAGE IF
INSTRUCTED TO DO SO BY A COMTECH EF DATA CUSTOMER SUPPORT TECHNICIAN.
Firmware Images:
Base-Modem
Use the ◄ ► arrow keys to select Base-Modem or Packet-Processor, and then press ENTER.
6.2.6.7.1 Utilities: Firmware  Base-Modem
Firmware Information:
Boot-ROM
Use these submenus to view information about the CDM-625A Base Modem internal firmware.
This screen identifies the firmware image that is loaded on startup or reboot of the Base Modem
with an asterisk (*). Use the
and then press ENTER.
Utilities: Firmware  Base-Modem  Boot-ROM, Image#X
6.2.6.7.1.1
Bootrom:
FW/12865X
The example shown here is for the Bootrom firmware opening screen. Typical for the Image#1
or Image#2 screens, you may use the
constituent firmware blocks that make up the bulk.
This read-only information is provided for: firmware type; its number (where 'X' is the revision
letter); its build date (in day/month/year format); and its version number (e.g., 1.X.X). Press
ENTER or CLEAR to return to the previous menu.
Utilities: Firmware  Base-Modem Select
6.2.6.7.1.2
Current Active Image is #1
Next Reboot, will use Image: #1
The modem can store two complete firmware images. Use this menu to select which image is
loaded the next time the unit reboots. The top line shows the current active image while, on the
bottom line, you may use the
Packet-Processor
Image#1* Image#2
◄ ► arrow keys to select Boot-Rom, Image#1, Image#2, or Select,
DD/MM/YY
#.#.#
arrow keys to scroll through information for all the
▲▼
arrow keys to select the other image. Press ENTER when
▲▼
6–86
()
Select ()
()
Revision 0
MN-CDM625A