Config Mdm | Modem Utilities - Comtech EF Data CDM-710 Installation And Operation Manual

CDM-710/L Broadcast Satellite Modem
Ethernet Interface Operation

8.5.3.3 Config Mdm | Modem Utilities

Figure 8-14. Config Mdm | Modem Utilities page
Use this page (Figure 8-14) to perform the following Modem Utilities tasks:
• Select the Boot Image;
• Perform a Soft Reboot;
• Save and Load Configurations;
• Set up Redundancy Operation;
• Set the Date and Time;
• Select the Clock Mode;
• Select and run a Test Mode;
• Assign a Circuit ID.
Make your configuration settings changes as needed in each section. Click the
action buttons as provided (e.g., [Submit], [Save], [Load], etc.) to save.
8–22
MN/CDM710.IOM
Revision 12