C.3 Installing The Pci/Disk Box - Fujitsu PRIMEPOWER900 Manual

Appendix C PCI/Disk Box
C.3 Installing the PCI/Disk Box
This section contains notes and specifications for PCI/disk box installation.
C.3.1 Notes on PCI/disk box installation
Equipment damage
Be sure to follow the precautions below when installing the PCI/disk box.
Otherwise the PCI/disk box may be damaged.
• Rack installation notes
The following product safety instructions must be addressed when installing this
product in the rack.
l The PCI/disk box is installed in a closed or multi-unit rack assembly, so the
ambient operating temperature inside of the rack environment may be greater than
the room temperature. Be sure to install the PCI/disk box in an environment
compatible with the manufacturer's maximum rated ambient temperature.
- Adjust air conditioning and circulation to prevent the rack's internal ambient
temperature from exceeding the maximum operating temperature of this unit.
- Maximum internal operating temperature of this unit: 35 °C (95 °F).
- Install the PCI/disk box so that the amount of air flow required for safe
operation of the PCI/disk box is not compromised.
- The PCI/disk box has ventilation openings at the front and back faces of the
unit.
To prevent overheating, do not cover or close these ventilation openings.
l Mount of the PCI/disk box in the rack such that a hazardous condition does not
result from uneven mechanical loading. To maintain the stability of the entire rack,
fix the rack to the wall or floor by suitable means.
- Take care to prevent injuries when installing the PCI/disk box into the rack.
- Do not install the PCI/disk box into a rack if the PCI/disk box makes the rack
top-heavy.
- Maximum configured weight of this unit: 40 kg (88 lb).
l If the PCI/disk box is supplied with power from a power strip or service outlet
located in other units, it may overload the power supply cable or the power strip of
those units.
106 U41290-J-Z816-3-76